hpr2089 :: Solving a blinkstick python problem
How I solved a problem I found when trying to control my new blinkstick nano with Python
Hosted by MrX on 2016-08-04 is flagged as Clean and is released under a CC-BY-SA license.
Hardware, Electronics, Programming, Raspberry pi, python, open source, BlinkStick.
Listen in ogg, spx, or mp3 format. | Comments (1).
This is a show describing how I solved a problem of using my new Blinkstick Nano in Python, the problem occurred because I inadvertently installed the blinkstick module to the wrong version of Python as I have multiple versions of python installed on my raspberry pi.
A blinkstick is a USB powered device with attached RGB ledâ€™s, it can be controlled using a wide range of languages, and supports the Raspberry Pi, Linux, Microsoft Windows & Apple
As a side note I forgot to mention that the blinkstick hardware and software is Open Source
Link to blinkstick website
This is the particular model I bought
Initially I blindly followed the advice given at https://www.blinkstick.com/help/raspberry-pi-integration which recommended the following commands
sudo apt-get install -y python-pip python2.7-dev sudo pip install blinkstick sudo blinkstick --info blnkstick --add-udev-rule
I discovered that the blinkstick module was not being found when I ran my python script, this turned out to be because I was invoking a different version of python in my script from that which I installed the blinkstick module. I installed the blinkstick module to Python 2.7, my script was running python 3.2
I ran the following commands to rectify the problem
sudo apt-get install -y python3-pip sudo pip-3.2 install blinkstick sudo blinkstick --info (Run in my script) blinkstick --add-udev-rule (Not required 2nd time round)
Here are some links I looked at to get some understanding of what was going on
Installing Python Modules
Wikipedia entry for pip
You can get a list of your installed python modules by first going to the python interpreter by typing
python at the command prompt and issuing the following command
You can list your python search path by first going to the interpreter by typing
python at the command prompt and issuing the following commands, the search path is the list of system directories that python will search to run things like commands and modules
>>> import sys >>> sys.path